$294.00
Sometimes you just have more to say. A stronger message. A bolder look. Something you just need to convey. Sometimes small just isn’t an option. Our collection of Statement Necklaces was designed to help you say more with your image. These are the pieces that command the room. That become the talk of the office or party. These are the head turners. No make that head snappers! We believe that if you’re going to go big you should also go beautiful...in a big way! Each piece of this jaw-dropping collection is made of either pure copper or jewelers brass and finished with sterling silver. We have placed an emphasis on colours, contrasts and unconventional shapes to really make these pieces pop. These are the sort of pieces that don’t just fit in with the status quo. These are the kind of pieces which inspire that new outfit you have been dreaming about. Whether they are the starting point or the final touch we know when you pull it all together...and you will...the result will be nothing short of stunning!
Imagine the cobblestones beneath your feet. The crisp breeze runs through your hair and across your face. The sun is breaking between the ashen clouds. Upon the crest of the hill it rests. The castle in which the great hall resides. Ornate but not overstated. This designs charm is in its triangular shaping and sparse, yet rich, colouring. The pure copper is brought to life by the splashes of ruby red and glossy black. This piece is eye catching and yet not loud. It is versatile and goes well with a wide variety of outfits...probably the ones you were just picturing! It fairs well in both the formal and semi-formal setting. To wear this is piece is to showcase your confidence and to give a subtle nod to your interests in times past.
Length of the necklace is 21 inches. The length each copper piece is 2.8 cm or 1.1 inches. You can clip the clasp where ever it fits the best. This necklace is finished with sterling silver chain and jump rings.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
*This necklace comes with tracking and insurance.
$105.00
Inspired by tiles from ancient cities. These cufflinks are great in formal or casual setting and their unusual subject matter is an excellent conversation piece! We know you are having trouble finding interesting cufflinks. That inspired us to go and dream up a whole collection of unusual but classy subjects for you to choose from.
The cufflinks are made from copper and are soldered together and coated on the back to finish off their appearance. They are about 1.9 cm (.75 inches). They have been antiqued to give them a lost treasure appearance.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$55.00
Picture yourself at the top of the fortresses tower. Looking out over a vast land. Your halls are covered in beautiful patterns and carvings. Mirroring those patterns is the armour dawned by your guards. These earrings were designed to be reminiscent of the ornamentation that adorned ancient shields. At their centre is a glossy black inlay which offsets the richness of the brasses golden hue giving the earrings a very classy appeal.
These earrings are approximately 2.2 x 1.8 cm(.86 x .71 inches) and are made of brass.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item. The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance. The ear hooks are surgical steel and come with rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$55.00
Picture yourself at the top of the fortresses tower. Looking out over a vast land. Your halls are covered in beautiful patterns and carvings. Mirroring those patterns is the armour dawned by your guards. These earrings were designed to be reminiscent of the ornamentation that adorned ancient shields. At their centre is an iridescent white inlay which offsets the richness of the brasses golden hue giving the earrings a very classy appeal.
These earrings are approximately 2.2 x 1.8 cm(.86 x .71 inches) and have an iridescent white colour in the centre.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item. The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance. The ear hooks are surgical steel and come with rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.